The RIDGID K-1500G w/C-14 (48462) Sectional Drain Cleaning Machine for 2 in. to 10 in. Drain and Sewer Lines, with 1 1/4 in. C-14 Cable (150 ft. Total), Cable Carriers, Tool Set, and A-34-10 Rear Guide Hose (Gasoline Engine) is designed to clean 2 in. to 10 in. lines in diameter and 300 feet in length. The machine is driven by a 6 HP gasoline engine and has a transmission with three forward speeds and one reverse.

The K-1500G machine is designed to use sectional-type cable that has a quick coupling system for disconnecting tools. The cable is manually fed in and out of the machine and the rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released.

Product Features

• • Designed for cleaning 2 in. to 10 in. drain and sewer lines
  • Gasoline engine enables operation in remote locations where electrical power is unavailable
  • High power construction cuts through roots fast
  • Unique, easy-to-use, instant-acting cable clutch maximizes operator control:
    • Pull handle down and cable spins at 600 RPM
    • Release handle, cable stops instantly
  • Comes equipped to use 1 1/4″ cable to clean 3″ to 10″ lines through 300 feet
  • 6 HP gasoline engine drives cable via four-speed transmission
  • Cable spinning speed can be set to fit the application:
    • Forward speeds of 333, 425 and 500 RPM
    • Reverse speed of 250 RPM
  • Machine easily rolls to the job site on cart and sets up quickly
  • Low-profile, four-wheel cart guards against machine upset and possible fuel spillage

• Machine Dimensions:
  • Width Wheel to Wheel: 26 in. (66 cm)
  • Length Including Kickstand: 28 in. (71 cm)
  • Ground to Top of Handle: 38 in. (97 cm)
  • Back of Handle to Front: 49 in. (124 cm)
  • Ground to Top of Housing Shell: 27 in. (60 cm)