The RIDGID K-50-8 (59000) Sectional Drain Cleaning Machine for 3/4 in. to 4 in. Drain Lines, with A-30 Cable Kit, A-17-A Adapter, A-17-B Adapter (115V) is a portable drain cleaning machine designed to clean 1 1/4 in. to 4 in. drain lines. Applications include sink, shower and floor drains. The machine is capable of running three different size cables: 5/16″, 3/8″ and 5/8″.

The K-50 machine is driven by a 1/6 HP motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle switch provides FORWARD/OFF/REVERSE control of the motor.

The K-50 is designed to use 5/8″ diameter sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 400 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released.

The K-50 is also designed to use A-17 Adapters. Adapters will hold 5/16″ or 3/8″ continuous length cables. Rotation of the adapters is controlled by the clutch handle. The cable adapter is equipped with a quick-acting brake which immediately stops rotation of the drum when the clutch handle is pulled upward.

Includes

• 1 – 115V Sectional Drain Cleaning Machine
• 1 – A-17-A Adapter with 25 ft. x 5/16 in. Cable and Bulb Auger
• 1 – A-17-B Adapter with 35 ft. x 3/8 in. Cable and Bulb Auger
• 1 – A-30 Cable Kit:
  • 1 – Six Sections of C-8 Cable, 5/8 in. x 7 1/2 ft. (45 feet)
  • 1 – A-10 Cable Carrier
  • 1 – T-201 Straight Auger
  • 1 – T-202 Bulb Auger
  • 1 – T-205 “C” Cutter
  • 1 – T-211 Spade Cutter
  • 1 – A-13 Coupling Pin Key
  • 1 – A-14-6 Rear Guide Hose
  • 1 – A-1 Left-Hand Drain Cleaning Mitt

Product Features

• Designed for cleaning 3/4 in. to 4 in. drain lines, including sink, shower and floor drains
• Suitable for professional use with compact, powerful and versatile design
• Capable of running three different size cables: 5/16″, 3/8″ and 5/8″
• Uses sections of 5/8″ cable to clean lines up to 100 ft (5/8″ cable best for 1 1/4″ to 3″ drains)
• Equipped with A-17 adapter, which runs up to 50 ft of 5/16″ or 35 feet of 3/8″continuous length cable
  • 5/16″ cable best for 3/4″ to 1 1/2″ lines
  • 3/8″ cable best for 11⁄4″ to 2″ lines
• Unique, easy-to-use, instant-acting cable clutch maximizes operator control:
  • Pull handle down and cable spins at 400 RPM
  • Release handle, cable stops instantly
• Powered by 300-watt motor
• Approved by CSA to CSA and UL Standards
• Voltage: 115V