1085 SW 67th Avenue
Miami, FL 33144
+1 305 603 7755
24/7 Customer Support
Mon - Fri: 6:00 am - 5:00 pm / / Sat: 7:00 am - 1:00 pm
Online store always open
K-6200 w/C-24 HD Auto-Feed Drum Machine for 3 in. to 6 in.
The RIDGID K-6200 w/C-24 HD (93557) Auto-Feed Drum Machine for 3 to 6 in. Drain and Sewer Lines, with C-24 HD 5/8 in. x 100 ft. Heavy Duty Cable and Tools (115V) will clean drain lines from 3 in. to 6 in. in diameter and up to 200 feet in length. The 4/10 HP universal motor spins 5/8 in. cable at 285 RPM. When the cable hits the blockage, the motor gears down automatically to deliver greater power and enhance operator control.
$5,235.83 $5,235.83
Out of stock
The RIDGID K-6200 w/C-24 HD (93557) Auto-Feed Drum Machine for 3 to 6 in. Drain and Sewer Lines, with C-24 HD 5/8 in. x 100 ft. Heavy Duty Cable and Tools (115V) will clean drain lines from 3 in. to 6 in. in diameter and up to 200 feet in length. The 4/10 HP universal motor spins 5/8 in. cable at 285 RPM. When the cable hits the blockage, the motor gears down automatically to deliver greater power and enhance operator control.
The molded polyethylene drum includes an inner drum that guards against cable flip-over. An integral Ground Fault Interrupter (GFCI) is built into the line cord and a “kickstand” base is provided for machine stability during operation. A pneumatic foot actuator provides ON/OFF control of the motor.
The drum powers a 5/8″ inner core cable that has a quick-change coupling system for connecting or disconnecting tools. The cable is fed in and out of the drain by an AUTOFEED assembly at a rate of 0-28 feet/min. An integral torque limiter will cause the drum to stop rotating whenever excessive torque is created when the cutting tool attached to the cable hits a snag and stops rotating.
Details
The RIDGID K-6200 w/C-24 HD (93557) Auto-Feed Drum Machine for 3 to 6 in. Drain and Sewer Lines, with C-24 HD 5/8 in. x 100 ft. Heavy Duty Cable and Tools (115V) will clean drain lines from 3 in. to 6 in. in diameter and up to 200 feet in length. The 4/10 HP universal motor spins 5/8 in. cable at 285 RPM. When the cable hits the blockage, the motor gears down automatically to deliver greater power and enhance operator control.
The molded polyethylene drum includes an inner drum that guards against cable flip-over. An integral Ground Fault Interrupter (GFCI) is built into the line cord and a “kickstand” base is provided for machine stability during operation. A pneumatic foot actuator provides ON/OFF control of the motor.
The drum powers a 5/8″ inner core cable that has a quick-change coupling system for connecting or disconnecting tools. The cable is fed in and out of the drain by an AUTOFEED assembly at a rate of 0-28 feet/min. An integral torque limiter will cause the drum to stop rotating whenever excessive torque is created when the cutting tool attached to the cable hits a snag and stops rotating.
Product Features
- Designed for cleaning 3 in. to 6 in. drain and sewer lines up to 200 feet
- Superior maneuverability and small footprint allow easy access to tight work areas
- Equipped with advanced cable control system:
- Causes drum to slow down when blade becomes lodged in a blockage
- Limits potential for cable to flip-over inside the drum
- 4/10 HP universal motor and gearbox bear down as torque builds
- Audible warnings let operator know when blockage is encountered
- Drum requires no adjustments to stay aligned and tight on drive shaft
- Constructed for easy maintenance:
-
- Drum separates from machine in seconds
- Inner drum and guide tube remove easily to maintain or replace cable
- Low center of gravity frame design and custom kickstand keep machine firmly anchored during operation
- Rugged, corrosion-resistant polyethylene drum is rust and dent proof
- Double tubular frame is lightweight and designed for extra strength
- Equipped with “AUTOFEED” automatic cable feed that powers cable in and out of the drain
- Recommended for use with 5/8 in. cable
- Approved by CSA to CSA and UL Standards
- Drum Capacity: 100 ft of 5/8 in. cable
- Voltage: 115V
Includes
- 1 – 115V Drum Machine with Auto-Feed Trigger
- 1 – C-24 HD 5/8″ x 100′ Heavy Duty Cable
- 1 – T-458 5/8″x 2′ Trap Leader
- 1 – T-406 1 3/4 in. Spade Cutter
- 1 – T-411 2″ Double Cutter
- 1 – T-413 3″ Double Cutter
- 1 – T-414 4″ Double Cutter
- 1 – Tool Box
- 1 – Pair of Reclining Legs
- 1 – Set of Drain Cleaning Gloves
Product Video
Reviews
There are no reviews yet.
Latest Deals
New Deals & Coupons
Browse our website to get new deals and coupons everyday. adipisicing elit.
Iure aspernatur
Find The Best Offers
Get the best offers and prices for all products and services. adipisicing elit.
Iure aspernatur
Save Money Easily
Use coupon codes to claim discounts and save money easily. tur adipisicing elit.
Iure aspernatur
ALL RIDGID TOOLS
CATEGORIES
Save Up To 30% Get the Ridgid Power Tools
- The new RIDGID RP 115 gives professionals a more accessible option for press tools with major value. With single-handed jaw opening and operation, this tool is easy to use on residential jobs (and beyond). You can now press a vast majority of the fittings currently installed in the market with the latest from North America’s leader in pressing
Be the first to review “K-6200 w/C-24 HD Auto-Feed Drum Machine for 3 in. to 6 in.”